DFW outdoor 0.4kV low voltage cable tap box
+
  • DFW outdoor 0.4kV low voltage cable tap box

DFW outdoor 0.4kV low voltage cable tap box

DFW series 0.4KV low-voltage cable branch box, mainly used in the public power grid, according to the distribution network distribution and user requirements, according to a variety of sub-line mode, box type and installation method, so that users in the flexible scheme easy to choose. In the construction and transformation of the national city network, it is a support product to replace the overhead line. It is widely used in low-voltage power transmission and distribution systems with three-phase AC 380/220V and rated current below 1250A, such as power transformation and distribution stations, industrial and mining enterprises, both sides of streets, garden residential quarters, high-rise buildings, airports, construction and renovation projects, etc., as a complete set of stereotyped equipment for distributing electric energy to other users or equipment with cables.
Certification

Category:

Telephone:

Product Details


Product overview

DFW series 0.4KV low-voltage cable branch box, mainly used in the public power grid, according to the distribution network distribution and user requirements, according to a variety of sub-line mode, box type and installation method, so that users in the flexible scheme easy to choose. In the construction and transformation of the national city network, it is a support product to replace the overhead line. It is widely used in low-voltage power transmission and distribution systems with three-phase AC 380/220V and rated current below 1250A, such as power transformation and distribution stations, industrial and mining enterprises, both sides of streets, garden residential quarters, high-rise buildings, airports, construction and renovation projects, etc., as a complete set of stereotyped equipment for distributing electric energy to other users or equipment with cables.

 

Model meaning

DFW

0.4

 

LV cable branch box

Rated voltage (kV)

Incoming current (A)

Outlet current (A)

Number of incoming lines

Outlet number

 

Working conditions

Altitude: ≤ 2000 m;

High ambient temperature: 45°C, low ambient temperature:-25°C;

Sunshine intensity: 0.1W/cm2 (wind speed: 0.5 m/s), large daily temperature difference: 25K;

Indoor relative humidity: daily average <95%, monthly average <90%;

High wind speed: 35 m/s (Note: wind speed refers to the lOmin average wind speed at a height of 10m from the ground);

Load: 10mm ice cover and 17.5 m/s wind speed at the same time;

Earthquake resistance: ground horizontal acceleration 0.2g; Vertical acceleration O.lg acts simultaneously. The resonance, sine and beat wave test methods shall be adopted; the vibration shall be excited for 5 times, with 5 waves for each time, with an interval of 2s for each time. Safety factor is not less than 1.67;

Rated frequency of the system: 50Hz.

 

Technical parameters

Project Name

Unit

Technical parameters

Rated voltage

kV

0.4

Rated current

A

630

Rated short-time withstand current

kA

20/3

Rated peak withstand current

kA

50

DC withstand voltage (15min)

kV

52

5min power frequency withstand voltage

kV

45

Lightning impulse withstand voltage

kV

105

Partial discharge

PC/kV

<10/15

Loop resistance

μΩ

≤ 4

Protection level

 

IP44

Use ambient temperature

°C

-50 to 60

Applicable cable section

mm2

25-400

 

Key words:

DFW outdoor 0.4kV low voltage cable tap box

Get Quote

Note: Please leave your contact information and our professionals will contact you as soon as possible!

Submit immediately